Solution

When use, turn on the cooling water first so that the water flow circulates in the laser tube according to the principle that the cooling water inlet must follow from the positive to negative end of laser tube. Adjust the outlet tube position to ensure that it is full filled with the cooling water and there is no bubble in the tube, and then turn on the power supply. ... [Detail]

2019-03-21

CO2 RF metal lasers are one of the fastest growing technologies in the industrial laser market in recent years and are considered to be the best alternative to glass tube sealed CO2 lasers. ... [Detail]

2018-10-23

A carbon dioxide laser (CO2 laser) is a gas laser that uses CO2 gas as working substance. The discharge tube is usually made of glass or quartz material filled with CO2 gas and other auxiliary gases (mainly helium and nitrogen, usually with a small amount of hydrogen or helium); the electrode is generally a hollow cylinder made of nickel; One end is a gold-plated total reflection mirror and the other end is a partial mirror milled with tantalum or gallium arsenide. ... [Detail]

2018-09-13

The basic structure of a typical sealed off CO2 laser tube is shown in the above figure. It consists of three parts: hard glass, resonant cavity and electrode. ... [Detail]

2018-08-21

We often found these situations that laser tube may appear under power or no light,lifetime short,laser tube occur unrepairable damage etc. In the daily processing of laser engraving and cutting, most of the reasons is that the daily maintenance of the laser tube is not enough.Let’s talk about the working condition of laser tube and operating common problems analysis and solution. ... [Detail]

2018-04-10

check the laser mirror and focus lens whether it is dirty. If it is dirty, please immediately clean it with alcohol; ... [Detail]

2017-07-27