Solution

Heating generated from laser can absorb dirtto contaminate the surface of optical lens. Dust, oil vapour, water vapour, splashing of materials during cutting and engraving, fingerprints and so on can also contaminate the optical lens. It will decrease the transmittance of laser lens, cause laser process power drop and lens damage. ... [Detail]

2020-04-24

The laser tube is the heart of a laser machine which plays a decisive role in laser cutting performance. A good laser tube should has ideal mode, stable power and other elements. ... [Detail]

2020-03-24

Supporting point Support points must be accurate. Place the laser tube according to the support label attached to the laser tube by the manufacturer. ... [Detail]

2019-08-07

The CO2 laser produced by SPT laser has good resistance. The power attenuation is less than 10% within 10,000 hours. The structure is stable. There are tens of thousands of terminal laser processing customers in the world. For example, the laser tube encounters the following problems, follow the steps in this article to troubleshoot. ... [Detail]

2019-06-12

SPT Laser invites you to spend some time reading the laser tube safety instructions, including precautions and safety reminders during the use of this type of laser tube, and detailed information such as installation and warranty. This manual consists of laser tube information, installation and use, warranty terms, etc. Please keep it carefully and check it out at any time. ... [Detail]

2019-05-24

When use, turn on the cooling water first so that the water flow circulates in the laser tube according to the principle that the cooling water inlet must follow from the positive to negative end of laser tube. Adjust the outlet tube position to ensure that it is full filled with the cooling water and there is no bubble in the tube, and then turn on the power supply. ... [Detail]

2019-03-21